Smart and IIoT-enabled panels
See every motor and meter, from anywhere
Our smart panels log data to the cloud, raise alerts on faults and trips, and let authorized people monitor and operate equipment from a phone or a control room. They are ready for Industry 4.0.
- Pump P1Running
- Pump P2Running
- Pump P3Standby
What a smart panel does
More than a panel with a display
Remote monitoring
IIoT-enabled panels with real-time status, current and voltage of motors.
Cloud data logging
Data logging and analytics on cloud platforms.
Energy management
Energy monitoring, optimization and load management.
Alerts and control
SMS, email and mobile app alerts for faults and trips, with remote operation.
Predictive maintenance
Fault diagnostics that point to the problem before a breakdown.
Smart MCC
Intelligent motor control centre with PLC and SCADA integration.
How it works
From the panel to your phone
Measure
Meters, drives, the PLC and sensors in the panel record current, voltage, energy, run status and trips.
Connect
A gateway or the PLC sends the data out over Modbus, Profinet, BACnet, MQTT or OPC.
See and act
Dashboards show live status and trends. Alerts reach the right people by SMS, email or mobile app, and authorized users can operate equipment remotely.
Where it pays off
What changes when the panel reports in
Find the energy you are paying for
Energy monitoring by feeder shows where power goes, so load management and optimization start from real numbers.
Hear about a trip before the phone call
Fault and trip alerts go straight to the people who can fix them, with the readings that led up to it.
Check remote pump houses without a visit
Status, current and run hours for each motor are on a dashboard, so a site visit is for work, not for looking.
Plan maintenance instead of reacting
Trends and fault diagnostics help you spot a struggling motor or drive before it fails.
New panels or upgrades
Start with one panel, then grow
Smart features can be built into a new panel, or added to existing panels step by step as part of a digital transformation plan. We help choose the right panels to start with and design the system around them.
- Smart panel selection and system design
- Gateways, dashboards and alarm set-up
- Energy monitoring and optimization
- Upgrades of existing PCC, MCC and pump panels
Protocols we work with
- Modbus
- Profinet
- BACnet
- MQTT
- OPC
Questions and answers
Questions about smart panels
What is an IIoT-enabled panel?
It is a control panel that sends data such as motor status, current, voltage and energy to a cloud dashboard and raises alerts, so authorized people can monitor and operate equipment remotely.
Can existing panels be made smart?
Often, yes. Meters, a gateway or a PLC can be added to an existing panel so it reports to a dashboard and sends alerts. We look at the panel first and suggest the simplest way to do it.
How are alerts sent?
Alerts go out by SMS, email or mobile app for faults, trips and other conditions you choose.
Which protocols do smart panels use?
Smart panels connect over Modbus, Profinet, BACnet, MQTT and OPC.
Get a quote
Plan a smart panel for your site
Tell us which equipment you want to see and who should get alerts. We will suggest a starting point.
For a quick quote, send
- Panels or equipment to monitor
- What you want to see: status, energy, faults
- Who should receive alerts, and how
- Existing panels to upgrade, if any