HVAC and building panels

HVAC and building services panels

Control and monitoring panels for plant rooms, air handling and building services, ready to connect to your BMS.

A wall of motor control feeders labelled for air handling units, exhaust fans and pumps, with indicator lamps and emergency stops

What we build

HVAC and building panels we make

Chiller plant and HVAC control

Sequencing for chillers, pumps and cooling towers, with staging, changeover and alarms built into the logic.

Primary, secondary and condenser pumping

Starter and VFD panels for chilled water and condenser water pumps, with duty sharing and status for the BMS.

AHU, cooling tower, VAV and axial fan panels

Panels for air handling units, cooling tower fans, VAV systems and axial fans, with fire alarm interlocks where required.

BMS panels

Field panels and integration so the building management system can see and command plant equipment over BACnet or Modbus.

Inside the panel

Ready for the BMS from day one

Building services panels have to talk to the BMS and react to the fire alarm system. We plan those points at the drawing stage.

  • Hand, off and auto control for every fan and pump
  • VFDs on fans and pumps where speed control saves energy
  • Fire alarm interlocks to stop or start fans as specified
  • BACnet or Modbus points mapped for the BMS
  • Energy metering for plant rooms and major loads
  • Panels for fire engines and diesel generator sets on the same project

Equipment we control

  • Chillers and cooling towers
  • Chilled and condenser water pumps
  • AHUs and VAV systems
  • Axial and exhaust fans
  • Fire engines and DG sets

Where they’re used

Industries we build these for

Commercial buildingsHVAC contractorsPharmaceuticalFood and beverageManufacturing

Make it a smart panel

Add remote monitoring, cloud data logging and SMS or app alerts to any panel in this range.

See smart panels

Questions and answers

Questions about HVAC and building panels

What is a BMS panel?

A BMS panel connects plant equipment such as pumps, fans and AHUs to the building management system, so operators can see status and send commands from one screen.

Which protocols do your HVAC panels support?

BACnet and Modbus are the usual choices for building systems. Our panels can also communicate over Profinet, MQTT and OPC.

Why use VFDs on HVAC pumps and fans?

Most HVAC loads change through the day. A VFD runs fans and pumps at the speed the load needs instead of full speed all the time, which saves energy.

Do the panels interlock with the fire alarm system?

Yes. Fans can be stopped or started on a fire alarm signal, as your fire and HVAC consultants specify.

Get a quote

Get a price for HVAC and building panels

Send what you have, even if it is only a few lines. We reply with questions, a drawing and a price.

For a quick quote, send

  • Equipment list with kW ratings
  • BMS make and protocol, if known
  • Fire alarm interlock requirements
  • Consultant specification, if any
  • Site location and timeline